NCERT SOLUTIONS
Chapter 7 – Particulate Nature of Matter
Class 8 Science | NCERT Curiosity
Explore the fascinating world of matter through detailed NCERT solutions for Class 8 Science Chapter 7 – Particulate Nature of Matter.
This chapter explains that all matter is made up of extremely tiny constituent particles. It explores interparticle spaces, interparticle attractions, solids, liquids, gases, melting, boiling, evaporation, dissolving and diffusion.
How to use: All questions and answers are expanded by default. Use the controls to expand or collapse the complete chapter.
1. Chapter Introduction
Everything around us is made up of matter. The air we breathe, water we drink, food we eat, books, stones, plants and animals are all examples of matter.
Matter is made up of extremely tiny particles called constituent particles. These particles are so small that they cannot be seen individually with our naked eyes.
The arrangement, spacing, attraction and movement of these particles determine whether a substance exists as a solid, liquid or gas.
2. Probe and Ponder
Q1. Why is it possible to pile up stones or sand, but not a liquid like water?
Stones and grains of sand are solids. Their constituent particles are closely packed and held together by strong interparticle attractions. Therefore, each stone or grain retains its own shape and can rest on another grain to form a heap.
Water is a liquid. Its particles can move past one another because the attractions between them are weaker than in solids. Therefore, water flows and spreads instead of forming a heap.
Q2. Why does water take the shape of our folded hands but lose that shape when we open them?
Water is a liquid and does not have a fixed shape. Its particles can move past one another. When we fold our hands, they act as a container and hold the water temporarily.
When we open our hands, water flows away and loses the shape formed by our hands.
Q3. How does invisible air add weight to an inflated balloon?
Air is matter. It has mass and occupies space. When air is pumped into a balloon, additional air particles enter it, increasing the total mass of the balloon and its contents.
Therefore, an inflated balloon weighs slightly more than the same balloon before inflation, when measured under suitable conditions.
Q4. Can matter be broken into smaller and smaller particles?
Yes. Matter can be broken into smaller pieces by cutting, grinding or crushing. However, these physical processes do not change the identity of the substance. They only reduce the size of the pieces.
Matter is composed of extremely tiny constituent particles.
3. 7.1 – What Is Matter Composed Of?
What are constituent particles?
Constituent particles are the extremely small basic units that make up a substance.
Every material around us is made up of a very large number of these particles.
For example:
- Chalk is made up of tiny constituent particles.
- Sugar is made up of tiny constituent particles.
- Water is made up of water particles.
- Air is made up of different kinds of particles.
What happens when a piece of chalk is broken into smaller pieces?
When chalk is broken into smaller pieces, each piece is still chalk. If it is ground into fine powder, every tiny grain is still made of the same substance.
Grinding reduces the size of the chalk particles or pieces but does not produce a new substance.
What is the difference between a piece of chalk and chalk powder?
A piece of chalk is a large solid piece, whereas chalk powder consists of many tiny solid grains. Both are made of the same substance.
The difference is mainly in particle size and the size of the pieces, not in the identity of the substance.
What are interparticle spaces?
The spaces present between the constituent particles of matter are called interparticle spaces.
These spaces differ in size in solids, liquids and gases.
What are interparticle attractions?
The attractive forces that hold constituent particles together are called interparticle attractions.
The strength of these attractions depends on the nature of the substance and the distance between its particles.
Generally, the attractions are strongest in solids, weaker in liquids and negligible in gases in the simplified model used in this chapter.
Why is sugar not visible after dissolving in water?
When sugar dissolves in water, its constituent particles separate from the sugar crystals and spread throughout the water.
These particles are extremely small and cannot be seen with our naked eyes. Therefore, sugar appears to disappear even though it is still present in the solution.
Why does water still taste sweet after sugar dissolves?
Sugar particles remain present throughout the water after dissolving. They spread through the liquid, so a sample taken from different parts of the solution tastes sweet.
4. 7.2 – What Decides Different States of Matter?
What are the three common states of matter?
The three common states of matter are:
- Solid state.
- Liquid state.
- Gaseous state.
The physical state of a substance depends on the arrangement, spacing, attraction and motion of its constituent particles.
How do interparticle attractions determine the state of matter?
Interparticle attractions hold the particles of matter together.
- In solids, attractions are very strong and particles remain in fixed positions.
- In liquids, attractions are weaker and particles can move past one another.
- In gases, attractions are negligible and particles move freely in all directions.
How does temperature affect the state of matter?
Heating supplies thermal energy to the particles of a substance. Their motion becomes more vigorous and the arrangement of particles can change.
For example, ice changes into water on melting, and water changes into water vapour on boiling.
Cooling removes thermal energy and can cause gases to condense into liquids and liquids to freeze into solids.
5. Our Scientific Heritage – Acharya Kanad and Parmanu
Who was Acharya Kanad?
Acharya Kanad was an ancient Indian philosopher who proposed an idea that matter is made up of extremely tiny particles called Parmanu.
His ideas are associated with the Vaisheshika school of Indian philosophy.
He explored the question of whether matter could be divided endlessly or whether there was a smallest constituent unit.
What is Parmanu?
Parmanu is the term used in ancient Indian philosophy for an extremely tiny, indivisible unit of matter.
Acharya Kanad suggested that matter is composed of such tiny units.
What is the importance of Acharya Kanad's contribution?
His ideas show that people in ancient India thought deeply about the basic composition of matter.
His philosophical ideas provide an important historical connection to the modern scientific study of atoms and molecules.
6. 7.2.1 – Solid State
What is a solid?
A solid is a state of matter that has a definite shape and a definite volume.
Examples include stone, iron, wood, chalk, aluminium and ice.
How are particles arranged in solids?
In solids, constituent particles are closely packed and arranged in fixed positions. The interparticle attractions are very strong.
The particles cannot move freely from one place to another. They only vibrate about their fixed positions.
Why do solids have a definite shape and volume?
Solids have a definite shape and volume because their particles are closely packed and held together by strong interparticle attractions.
These particles remain in fixed positions and cannot move freely past one another.
What happens when a solid is heated?
When a solid is heated, its particles gain thermal energy and vibrate more vigorously.
At a sufficiently high temperature, the particles can move away from their fixed positions and the solid may melt into a liquid.
What is melting?
The process in which a solid changes into a liquid on heating is called melting.
Example: Ice changes into water when heated.
What is melting point?
The minimum temperature at which a solid melts into a liquid at atmospheric pressure is called its melting point.
| Substance | Melting point |
|---|---|
| Ice | 0 °C |
| Urea | 133 °C |
| Iron | 1538 °C |
7. 7.2.2 – Liquid State
What is a liquid?
A liquid is a state of matter that has a definite volume but no definite shape.
It takes the shape of the container in which it is placed.
Examples include water, milk, oil and glycerin.
How are particles arranged in liquids?
In liquids, particles are close to one another but are not fixed in position. The attractions between them are weaker than in solids.
Particles can move and slide past one another within a limited space.
Why do liquids flow?
Liquids flow because their particles can move past one another. They are not held in fixed positions like particles in solids.
What is boiling?
Boiling is the process in which a liquid changes into vapour throughout the liquid at a particular temperature for a given pressure.
During boiling, bubbles of vapour form within the liquid and rise to the surface.
What is boiling point?
The temperature at which a liquid boils and changes into vapour at a given pressure is called its boiling point.
At standard atmospheric pressure, pure water boils at approximately 100 °C.
What is evaporation?
Evaporation is the slow process by which a liquid changes into vapour from its surface at temperatures below its boiling point.
Examples:
- Drying of wet clothes.
- Drying of spilled water.
- Disappearance of water from an open container over time.
Difference between boiling and evaporation
| Boiling | Evaporation |
|---|---|
| Occurs throughout the liquid. | Occurs only at the surface. |
| Occurs at a particular boiling temperature for a given pressure. | Can occur at different temperatures. |
| Rapid process. | Generally slow process. |
| Bubbles form inside the liquid. | No bubbles are required. |
8. 7.2.3 – Gaseous State
What is a gas?
A gas is a state of matter that has neither a definite shape nor a definite volume.
It expands and occupies the entire space available in its container.
Examples include oxygen, nitrogen, carbon dioxide and methane.
How are particles arranged in gases?
Gas particles are very far apart compared with particles in solids and liquids. The interparticle attractions are negligible in the simplified model used in this chapter.
They move freely and randomly in all directions.
Why do gases fill the entire container?
Gas particles move freely in all directions and have very weak attractions between them. Therefore, they spread throughout the available space and fill the entire container.
Why are gases easily compressed?
Gas particles have large spaces between them. When pressure is applied, these spaces can be reduced and the particles are brought closer together.
Therefore, gases are highly compressible compared with solids and liquids.
What are fluids?
Liquids and gases are together called fluids because they can flow and do not have a fixed shape.
9. 7.3 – How Does Interparticle Spacing Differ in the Three States of Matter?
What is interparticle spacing?
Interparticle spacing is the distance or space between the constituent particles of matter.
The spacing is minimum in solids, slightly greater in liquids and maximum in gases.
Compare interparticle spacing in solids, liquids and gases.
| Property | Solid | Liquid | Gas |
|---|---|---|---|
| Particle spacing | Minimum | Moderate | Maximum |
| Attraction | Very strong | Weaker | Negligible |
| Movement | Vibration | Slide past one another | Free movement |
| Shape | Fixed | Not fixed | Not fixed |
| Volume | Fixed | Fixed | Not fixed |
| Compressibility | Very low | Very low | High |
Why is air compressible but water practically incompressible?
Air is a gas. Its particles have large spaces between them. When pressure is applied, these spaces can be reduced.
Water is a liquid. Its particles are already closely packed, so there is very little space available for compression.
Why does the water level decrease after sugar dissolves?
When sugar dissolves, its particles separate and occupy some of the interparticle spaces between water particles.
The final solution volume can be less than the sum of the separate volumes of water and sugar. Therefore, the water level after dissolving may decrease compared with the level immediately after adding the sugar.
Why does sugar dissolve in water but sand does not?
Sugar dissolves because the interactions between water particles and sugar particles allow sugar particles to separate from the sugar crystals and spread through the water.
In sand, the particles are held together strongly enough that water cannot separate them under ordinary conditions. Therefore, sand does not dissolve in water.
10. 7.4 – How Particles Move in Different States of Matter?
Do particles of matter remain stationary?
No. Particles of matter are always in motion.
- Solid particles vibrate about fixed positions.
- Liquid particles move past one another.
- Gas particles move freely and randomly in all directions.
What is diffusion?
Diffusion is the process by which particles spread from a region of higher concentration to a region of lower concentration due to their random motion.
Examples include the spreading of perfume fragrance in a room and the spreading of colour in water.
Why does the smell of perfume spread throughout a room?
Perfume evaporates and forms vapour particles. These particles move randomly through the air and spread from one region to another.
As a result, the fragrance gradually reaches different parts of the room.
Why does potassium permanganate spread in water without stirring?
Water particles are in constant motion. They interact with potassium permanganate particles, helping them separate and spread throughout the water.
This process is an example of diffusion.
Why does diffusion occur faster in hot water than in cold water?
In hot water, particles have greater average kinetic energy and move more rapidly than in cold water. Therefore, diffusion generally takes place faster in hot water.
What happens when camphor is heated?
Camphor is a substance that undergoes sublimation. When heated, it changes directly from solid to vapour without passing through the liquid state under ordinary conditions.
Its vapour particles spread through the surrounding air, producing a characteristic smell.
11. Activities 7.1 to 7.9 – Answers
Activity 7.1 – Let us explore: Breaking and grinding chalk
- Take a piece of chalk.
- Break it into smaller pieces.
- Continue breaking until it becomes difficult to break by hand.
- Grind the small pieces using a mortar and pestle.
- Observe the fine powder using a magnifying glass.
Each tiny grain of the powder is still a speck of chalk.
Conclusion:Breaking and grinding chalk are physical changes. They reduce the size of the pieces but do not change the substance into a new material.
Activity 7.2 – Let us perform: Dissolving sugar in water
- Take a glass of water.
- Add two teaspoons of sugar.
- Stir the mixture until the sugar dissolves.
- Taste a small amount of the solution.
The sugar is no longer visible, but the water tastes sweet.
Conclusion:Sugar particles separate from the crystals and spread throughout the water. Matter is made up of extremely tiny particles.
Activity 7.3 – Let us find out: Investigating solids
Observe different solid objects such as a stone, iron nail, wooden block and piece of chalk. Try changing their shape using suitable force.
Observation:Solids generally maintain their shape and volume. They may be bent, broken or deformed by applying sufficient force.
Conclusion:Solid particles are closely packed and held by strong interparticle attractions.
Activity 7.4 – Observing water in different containers
Take 200 mL of water and pour it into containers of different shapes.
Observation:Water changes its shape according to the container, but its volume remains approximately 200 mL.
Conclusion:Liquids have a definite volume but no definite shape.
Activity 7.5 – Let us investigate: Smoke spreading in gas jars
- Collect incense smoke in a transparent gas jar.
- Place another empty gas jar above it.
- Remove the glass plate separating the jars carefully.
- Observe the movement of smoke.
Smoke spreads and fills the available space in both gas jars.
Conclusion:Gases do not have a fixed shape or volume. Their particles move freely and spread throughout the available space.
Activity 7.6 – Let us experiment: Compressing air using a syringe
- Take a syringe without a needle.
- Pull the plunger outwards.
- Close the open end tightly with your thumb.
- Push the plunger slowly inwards.
- Repeat the experiment with water.
The air volume decreases when the plunger is pushed. Water is practically incompressible under the same conditions.
Conclusion:Gas particles have large interparticle spaces and are easily compressed. Liquid particles are much more closely packed.
Activity 7.7 – Let us observe: Dissolving sugar and observing water level
- Take a glass vessel and fill it about halfway with water.
- Mark the water level as A.
- Add two teaspoons of sugar and mark the new level as B.
- Stir until the sugar dissolves.
- Mark the final level as C.
The water level rises when sugar is added. After the sugar dissolves, the level decreases to some extent.
Conclusion:The sugar particles occupy some of the interparticle spaces between water particles. The final solution volume may be less than the sum of the separate volumes.
Activity 7.8 – Let us experiment: Diffusion of potassium permanganate
- Take a transparent tumbler filled with water.
- Add a small crystal of potassium permanganate.
- Do not stir the water.
- Observe the colour spreading.
The purple colour gradually spreads throughout the water without stirring.
Conclusion:Particles are in constant motion. Their movement causes diffusion.
Activity 7.9 – Let us find out: Spreading of fragrance
Under teacher supervision, light an incense stick at one end of a well-ventilated room and observe how its fragrance reaches other parts.
Observation:The fragrance gradually spreads throughout the room.
Conclusion:Gas particles move randomly and continuously. This movement causes diffusion and spreads the fragrance through air.
12. In-text Questions and Answers
Q1. What is the basic composition of matter?
Matter is composed of extremely tiny constituent particles. These particles have spaces between them and attract one another.
Q2. Is grinding chalk a physical change or a chemical change?
Grinding chalk is a physical change because only the size of the chalk pieces changes. No new substance is formed.
Q3. Why does sugar disappear when dissolved in water?
Sugar separates into extremely tiny particles and spreads throughout the water. These particles cannot be seen with our naked eyes.
Q4. How are constituent particles held together in solids?
They are held together by very strong interparticle attractions and are closely packed in fixed positions.
Q5. In the solid state, how can particles be moved apart?
By heating the solid. Heating increases the thermal energy of particles and makes their vibrations more vigorous. At the melting point, the solid changes into a liquid.
Q6. What is the difference between the shape and volume of solids, liquids and gases?
| State | Shape | Volume |
|---|---|---|
| Solid | Definite | Definite |
| Liquid | Not definite | Definite |
| Gas | Not definite | Not definite |
Q7. Are you able to move your finger through water? Why?
Yes. Water is a liquid. Its particles can move past one another, so a finger can displace the water particles and move through it.
Q8. Do gases have a fixed volume?
No. Gases have neither a fixed shape nor a fixed volume. They expand to occupy the entire available space in a container.
Q9. What role does interparticle spacing play in determining the properties of matter?
Interparticle spacing determines how closely particles are packed and influences the strength of attraction between them. This affects the shape, volume, movement and compressibility of matter.
Q10. What can we say about the behaviour of gas in a syringe?
Gas is compressible because its particles have large spaces between them. When the plunger is pushed, the particles are forced closer together and the volume decreases.
Q11. What difference do you observe in the water levels after dissolving sugar?
The water level initially increases after adding sugar. After the sugar dissolves, the level decreases to some extent because the dissolved sugar particles occupy some of the spaces between water particles.
Q12. Do sand particles dissolve in water?
No. Sand does not dissolve in water under ordinary conditions. Its grains remain separate and settle at the bottom.
Q13. Why does sugar dissolve in water but sand does not?
Water particles can separate sugar particles from the sugar crystals and spread them throughout the water. In sand, the particles are held together too strongly for water to separate them under ordinary conditions.
Q14. What do you observe when potassium permanganate is added to water without stirring?
The purple colour gradually spreads throughout the water without stirring. This demonstrates diffusion caused by the continuous motion of particles.
Q15. Why does the fragrance of camphor reach all corners of a room?
Camphor particles enter the air as vapour and move freely in all directions. They spread throughout the room due to diffusion.
13. Think Like a Scientist
Q1. Why does colour spread faster in hot water than in cold water?
Particles in hot water have greater average kinetic energy and move faster than particles in cold water. Therefore, the colour spreads more rapidly through hot water.
Q2. What does the spreading of colour in water tell us about particles?
It shows that particles of matter are in continuous motion and that they can mix with one another through diffusion.
Q3. Why does the smell of an incense stick spread through a room?
Incense releases vapour and tiny particles into the air. These particles move randomly and spread from one region to another through diffusion.
14. Keep the Curiosity Alive – NCERT Exercise Solutions
Question 1. Choose the correct option. The primary difference between solids and liquids is that the constituent particles are:
(i) Closely packed in solids, while stationary in liquids.
(ii) Far apart in solids and have fixed positions in liquids.
(iii) Always moving in solids and have fixed positions in liquids.
(iv) Closely packed in solids and move past each other in liquids.
Correct Answer: Option (iv)Explanation: In solids, particles are closely packed and held in fixed positions. They vibrate about their fixed positions. In liquids, particles are also close together but can move past one another.
Question 2. Which of the following statements are true? Correct the false statements.
(i) Melting ice into water is an example of the transformation of a solid into a liquid.
TrueIce is a solid and changes into liquid water on heating.
(ii) Melting involves a decrease in interparticle attractions during the transformation.
TrueOn heating, particles gain thermal energy, move farther apart and the effective attractions holding them in fixed positions become weaker.
(iii) Solids have a fixed shape and a fixed volume.
TrueStrong interparticle attractions maintain their shape and volume.
(iv) Interparticle interactions in solids are very strong and interparticle spaces are very small.
True(v) When we heat camphor in one corner of a room, its fragrance reaches all corners of the room.
TrueCamphor vapour particles spread through air by diffusion.
(vi) On heating, we add energy to camphor, and the energy is released as a smell.
FalseCorrect statement: On heating, thermal energy is supplied to camphor. Its particles gain energy and escape into the air as vapour. The smell is caused by camphor particles reaching our nose, not by energy being released as a smell.
Question 3. If we could remove all the constituent particles from a chair, what would happen?
Explanation: A chair is made up of a very large number of constituent particles. These particles form the material of the chair and give it its mass, shape and properties.
If all the constituent particles were removed, no material would remain to form the chair.
Question 4. Why do gases mix easily, while solids do not?
Gases mix easily because their particles are far apart, have negligible interparticle attractions and move freely in all directions. Therefore, particles of different gases can spread and mix with one another.
In solids, particles are closely packed and held in fixed positions by strong attractions. They cannot move freely past one another. Therefore, two solids do not mix at the particle level in the same way as gases.
When two powders are mixed, their solid grains become intermingled, but the particles within each grain remain part of that solid material.
Question 5. Milk spilled on a table flows and spreads out, but the glass tumbler stays in the same shape. Justify this statement.
Milk is a liquid and glass is a solid. Their particles are arranged differently.
In milk, particles can move past one another because the interparticle attractions are weaker than in solids. Therefore, milk flows and spreads over the table. It has a definite volume but no fixed shape.
In glass, particles are held in fixed positions by strong attractions. Therefore, the tumbler retains its definite shape and volume.
Question 6. Represent diagrammatically the changes in the arrangement of particles as ice melts and transforms into water vapour.
Draw three boxes showing the particle arrangements in solid, liquid and gaseous states.
Explanation:
- Ice particles are closely packed in fixed positions.
- On heating, their vibrations become more vigorous.
- At the melting point, ice changes into water.
- Water particles move past one another while remaining relatively close.
- On further heating, water reaches its boiling point.
- Water changes into water vapour, whose particles move freely and are far apart.
Question 7. Draw a picture representing particles present in (i) Aluminium foil (ii) Glycerin (iii) Methane gas.
| Substance | State | Particle arrangement |
|---|---|---|
| Aluminium foil | Solid | Particles closely packed in fixed positions. |
| Glycerin | Liquid | Particles close together but able to move past one another. |
| Methane gas | Gas | Particles far apart and moving freely. |
Use the same size circles in all three diagrams. Change only the spacing and arrangement.
Question 8. Observe Fig. 7.16a showing a candle just extinguished after burning for some time. Identify the different states of wax and match them with Fig. 7.16b.
A candle just after being extinguished can show wax in all three physical states.
| Part of candle | State of wax | Particle arrangement |
|---|---|---|
| Body of candle and hardened wax | Solid | Particles closely packed in fixed positions. |
| Molten wax near the wick | Liquid | Particles close together and able to move. |
| Vapour near the wick | Gas | Particles far apart and moving freely. |
Explanation: The flame heats solid wax and melts it. Some liquid wax moves up the wick and changes into wax vapour. The wax vapour is the fuel that burns in the candle flame.
After the candle is extinguished, some remaining wax vapour may be visible as a white trail.
Question 9. Why does the water in the ocean taste salty, even though the salt is not visible?
Salt is dissolved in seawater. Its constituent particles spread throughout the water and are too small to be seen with our naked eyes.
These particles remain present in the water even though the original salt crystals are no longer visible.
Therefore, seawater tastes salty.
Question 10. Grains of rice and rice flour take the shape of the container when placed in different jars. Are they solids or liquids? Explain.
Both rice grains and rice flour are solids.
Each grain of rice has a definite shape and volume. Rice flour consists of many tiny solid grains. When placed in a container, these grains move and rearrange themselves, causing the heap to take the shape of the container.
The grains themselves do not become liquids. Each individual grain retains its solid nature.
15. Discover, Design and Debate – Project Work
Project 1. Fix a balloon over the neck of a bottle and put the bottle in hot water. What happens?
The balloon inflates when the bottle is placed in hot water. When the bottle is placed in cold water, the balloon shrinks.
Procedure:- Take an empty, dry bottle.
- Fix the mouth of a balloon tightly over the neck of the bottle.
- Place the bottle in a bowl of warm or hot tap water.
- Observe the balloon.
- Transfer the bottle to cold water and observe again.
Air inside the bottle gains thermal energy when heated. Its particles move faster and the air expands, causing the balloon to inflate.
When cooled, the air contracts and the balloon shrinks.
Project 2. Design models to represent particles of solids, liquids and gases using clay balls or beads.
Prepare three particle models using clay balls or beads of the same size.
| Model | Arrangement | What it demonstrates |
|---|---|---|
| Solid | Closely packed in regular rows. | Strong attraction and minimum spacing. |
| Liquid | Close together in irregular arrangement. | Particles can move past one another. |
| Gas | Far apart. | Maximum spacing and free movement. |
Project 3. Perform a role-play or dance showing the movement of particles in different states of matter.
Students can act as constituent particles of matter.
| State | Role-play movement |
|---|---|
| Solid | Stand close together and vibrate at fixed positions. |
| Liquid | Stay close but move slowly past one another. |
| Gas | Stand far apart and move freely in all directions. |
Project 4. Debate: 'Gases can spread and fill all the available space'. Is this property beneficial or harmful?
This property of gases can be both beneficial and harmful.
| Beneficial effects | Harmful effects |
|---|---|
| Oxygen spreads through rooms and helps us breathe. | Smoke from fires spreads through buildings. |
| Perfume fragrance reaches different parts of a room. | Harmful gases can spread through the environment. |
| Medical gases can reach patients through suitable equipment. | LPG leaks can spread and create fire or explosion hazards. |
| Air mixes naturally in the atmosphere. | Industrial gas leaks can affect nearby communities. |
The ability of gases to spread is useful in many situations but can be dangerous when harmful gases escape. Therefore, gases must be stored and handled safely.
16. Important Definitions and Quick Revision
Important scientific definitions
| Term | Definition |
|---|---|
| Matter | Anything that has mass and occupies space. |
| Constituent particles | Extremely tiny basic units that make up a substance. |
| Interparticle spaces | Spaces between constituent particles. |
| Interparticle attractions | Attractive forces between constituent particles. |
| Solid | State of matter having definite shape and volume. |
| Liquid | State of matter having definite volume but no fixed shape. |
| Gas | State of matter having neither fixed shape nor fixed volume. |
| Melting | Change of a solid into a liquid on heating. |
| Melting point | Temperature at which a solid melts at atmospheric pressure. |
| Boiling | Change of liquid into vapour throughout the liquid. |
| Boiling point | Temperature at which a liquid boils at a given pressure. |
| Evaporation | Slow change of liquid into vapour from its surface. |
| Diffusion | Spreading of particles from higher to lower concentration due to random motion. |
| Fluids | Liquids and gases that can flow. |
| Thermal energy | Energy associated with the random motion of particles. |
| Sublimation | Direct change of a solid into gas without passing through the liquid state. |
Comparison of the three states of matter
| Property | Solid | Liquid | Gas |
|---|---|---|---|
| Shape | Fixed | Not fixed | Not fixed |
| Volume | Fixed | Fixed | Not fixed |
| Spacing | Minimum | More than solid | Maximum |
| Attraction | Very strong | Weaker | Negligible |
| Movement | Vibration | Sliding movement | Free movement |
| Compressibility | Very low | Very low | High |
| Examples | Iron, stone, ice | Water, milk, oil | Oxygen, nitrogen, methane |
Changes of state of matter
| Process | Change |
|---|---|
| Melting | Solid → Liquid |
| Freezing | Liquid → Solid |
| Boiling | Liquid → Gas |
| Condensation | Gas → Liquid |
| Sublimation | Solid → Gas |
| Deposition | Gas → Solid |
Important facts for examinations
- All matter is made up of constituent particles.
- Particles have spaces between them.
- Particles attract one another.
- Particles are continuously moving.
- Solid particles are closely packed.
- Liquid particles can move past one another.
- Gas particles move freely in all directions.
- Solids have definite shape and volume.
- Liquids have definite volume but no fixed shape.
- Gases have neither fixed shape nor fixed volume.
- Gases are highly compressible.
- Liquids are practically incompressible.
- Melting is a physical change.
- Evaporation occurs at the surface.
- Boiling occurs throughout the liquid.
- Diffusion occurs due to the continuous motion of particles.
- Diffusion generally occurs faster at higher temperatures.
- Camphor undergoes sublimation.
- Rice grains and rice flour are solids.
- Acharya Kanad proposed the idea of Parmanu.
No comments:
Post a Comment