MG SCHOOL SCIENCE

Friday, 20 November 2026

7th Solution | Life Processes in Plants

MG SCHOOL SCIENCE

NCERT SOLUTIONS

Life Processes in Plants

Class 7 Science | Complete Chapter Study Material

In-text Questions Activities Exercise Answers Diagrams Revision Notes
Welcome to MG SCHOOL SCIENCE!

Explore the fascinating world of plant life processes. This chapter explains how plants prepare their food, transport water and minerals, exchange gases, transport prepared food and remove waste materials.

Learning objectives: Understand photosynthesis, nutrition, absorption, transportation, transpiration, respiration and excretion in plants.

All answers are expanded by default. Use the controls below to expand or collapse all sections.

1. Introduction to Life Processes

What are life processes?

Life processes are the basic activities performed by living organisms to maintain life. These processes help organisms obtain energy, grow, repair damaged parts and survive.

The major life processes include:

  1. Nutrition
  2. Respiration
  3. Transportation
  4. Excretion
Plants perform all essential life processes, just like other living organisms.
Why do plants need life processes?

Plants need life processes for the following reasons:

  • To prepare food for energy and growth.
  • To obtain oxygen and release energy from food.
  • To transport water, minerals and prepared food.
  • To remove waste materials produced during metabolism.
  • To maintain their growth and survival.

2. Nutrition in Plants

What is nutrition?

Nutrition is the process by which living organisms obtain food and use it for energy, growth, repair and maintenance.

Plants are mainly autotrophic organisms because green plants prepare their own food using sunlight, carbon dioxide and water.

What is autotrophic nutrition?

The mode of nutrition in which organisms prepare their own food from simple inorganic substances is called autotrophic nutrition.

Green plants prepare food through photosynthesis using carbon dioxide and water in the presence of sunlight and chlorophyll.

Examples: Grass, mango tree, hibiscus and other green plants.
What is heterotrophic nutrition?

The mode of nutrition in which organisms depend on other organisms for food is called heterotrophic nutrition.

Examples include animals, fungi and certain plants such as Cuscuta, which obtain nutrients from host plants.

Why are green plants called producers?

Green plants prepare their own food through photosynthesis. They provide food directly or indirectly to other organisms. Therefore, they are called producers in an ecosystem.

3. Photosynthesis

What is photosynthesis?

Photosynthesis is the process by which green plants prepare their food from carbon dioxide and water in the presence of sunlight and chlorophyll. Oxygen is released during this process.

Carbon dioxide + Water
↓ Sunlight and Chlorophyll
Glucose + Oxygen

Photosynthesis mainly takes place in the green parts of plants, especially the leaves.

What are the raw materials required for photosynthesis?

The main raw materials required are:

  1. Carbon dioxide: Obtained from the atmosphere through stomata.
  2. Water: Absorbed from the soil by roots.

Sunlight supplies energy, while chlorophyll absorbs light energy.

What is the role of chlorophyll?

Chlorophyll is the green pigment present in chloroplasts. It absorbs light energy from the Sun, which is used during photosynthesis.

Chlorophyll captures sunlight energy for the process of photosynthesis.
What is the role of sunlight in photosynthesis?

Sunlight provides the energy required for plants to convert carbon dioxide and water into food. Without an adequate light source, photosynthesis cannot proceed normally.

What is the role of stomata?

Stomata are tiny pores mainly present on the surface of leaves. They help in the exchange of gases between the plant and the atmosphere.

  • Carbon dioxide enters through stomata.
  • Oxygen can leave through stomata.
  • Water vapour is lost through stomata during transpiration.
What are chloroplasts?

Chloroplasts are small cell organelles present in the cells of green plant parts. They contain chlorophyll and are the main sites of photosynthesis.

What food is produced during photosynthesis?

Glucose is produced during photosynthesis. Plants use it for energy, growth and other metabolic activities. Excess carbohydrates may be converted into starch and stored in different plant parts.

Write the word equation for photosynthesis.
Carbon dioxide + Water
→ Glucose + Oxygen
In the presence of sunlight and chlorophyll
Write the balanced chemical equation for photosynthesis.
6CO₂ + 6H₂O
→ C₆H₁₂O₆ + 6O₂
Light energy and chlorophyll

This is the simplified overall chemical equation for photosynthesis.

Diagram: Photosynthesis in a green plant
🌳
☀ Sunlight
CO₂ enters leaves
Water absorbed by roots
Food prepared in green leaves
Oxygen released

Conceptual representation of photosynthesis.

4. Factors Affecting Photosynthesis

What are the important factors affecting photosynthesis?

The main factors are:

  1. Light intensity.
  2. Availability of carbon dioxide.
  3. Availability of water.
  4. Temperature.
  5. Amount of chlorophyll.

Photosynthesis takes place efficiently when suitable conditions are available.

Why is sunlight necessary for plants?

Sunlight supplies energy for photosynthesis. Plants capture this energy through chlorophyll and use it to prepare food.

Why is water important for photosynthesis?

Water is one of the raw materials needed for photosynthesis. It is absorbed from the soil by roots and transported to leaves through xylem.

Why is carbon dioxide important for plants?

Carbon dioxide supplies the carbon atoms used to prepare carbohydrates during photosynthesis. It enters leaves mainly through stomata.

5. Transportation in Plants

Why do plants need transportation?

Plants need transportation to move water, minerals and prepared food from one part to another.

Roots absorb water and minerals from the soil. Leaves prepare food, which is transported to growing and storage parts.

What is xylem?

Xylem is a vascular tissue that transports water and dissolved minerals from roots to stems and leaves.

It also provides mechanical support to plants.

Xylem transports water and minerals mainly upwards from roots.
What is phloem?

Phloem is a vascular tissue that transports prepared food, mainly sugars, from leaves to other parts of the plant.

Food can move from sources such as leaves to growing or storage regions. Transport through phloem can occur in different directions depending on the plant's needs.

Phloem transports prepared food throughout the plant.
Difference between xylem and phloem
XylemPhloem
Transports water and minerals.Transports prepared food.
Movement is mainly upwards from roots.Movement can be upwards or downwards.
Mostly made of dead conducting cells.Mostly made of living conducting cells.
Also provides mechanical support.Distributes organic nutrients.
How do roots absorb water from the soil?

Roots absorb water from the soil mainly through root hairs. Root hairs provide a large surface area for absorption.

Water generally enters root hair cells by osmosis, moving from a region of higher water potential to lower water potential across a selectively permeable membrane.

What are root hairs?

Root hairs are tiny hair-like extensions of root epidermal cells. They increase the surface area available for absorbing water and dissolved minerals from the soil.

6. Transpiration

What is transpiration?

Transpiration is the loss of water in the form of water vapour from the aerial parts of plants, mainly through stomata in leaves.

It helps in the movement of water from roots towards leaves and also cools the plant.

What are the advantages of transpiration?
  1. Helps in the upward movement of water and minerals.
  2. Creates transpiration pull.
  3. Helps cool the plant.
  4. Helps maintain water movement through the plant.
What is transpiration pull?

When water evaporates from leaf surfaces through stomata, it creates a pulling force that helps draw water upwards through xylem vessels. This is called transpiration pull.

What are stomata and guard cells?

Stomata are tiny pores on leaf surfaces. Each stoma is surrounded by two specialised cells called guard cells.

Guard cells regulate the opening and closing of stomata and help control gas exchange and water loss.

7. Respiration in Plants

What is respiration?

Respiration is the process by which cells break down food molecules to release energy needed for life activities.

Plants respire throughout the day and night.

Do plants respire?
Answer:

Yes. Plants respire just like animals. They need energy for growth, repair, transport and other cellular activities.

What is aerobic respiration?

Aerobic respiration is the breakdown of glucose in the presence of oxygen to release energy. Carbon dioxide and water are produced.

Glucose + Oxygen
→ Carbon dioxide + Water + Energy
What is anaerobic respiration?

Anaerobic respiration is the breakdown of glucose without oxygen. In some microorganisms such as yeast, it produces alcohol, carbon dioxide and energy.

Glucose → Ethanol + Carbon dioxide + Energy
Difference between photosynthesis and respiration
PhotosynthesisRespiration
Prepares food.Breaks down food to release energy.
Requires light for the normal photosynthetic process.Occurs both day and night.
Takes place in chloroplasts.Begins in cytoplasm and, in aerobic respiration, continues mainly in mitochondria.
Stores energy in food molecules.Releases usable energy from food molecules.
Do plants respire only at night?
Answer:

No. Plants respire both during the day and at night. Photosynthesis requires light, whereas respiration occurs continuously in living cells.

8. Excretion in Plants

What is excretion?

Excretion is the process of removing metabolic waste materials from the body of an organism.

Plants do not have a specialised excretory system like animals, but they remove or store waste materials in several ways.

How do plants remove waste materials?

Plants remove waste materials through different methods:

  1. Oxygen and carbon dioxide diffuse through stomata and other surfaces.
  2. Excess water is removed through transpiration and guttation.
  3. Some waste materials are stored in leaves, bark and fruits.
  4. Stored wastes may be removed when leaves or bark are shed.
  5. Some wastes are released into the surrounding soil through roots.
What are examples of waste products in plants?

Examples include oxygen released during photosynthesis, carbon dioxide produced during respiration, excess water, resins, gums and certain other metabolic products.

9. Activities and Experiments

Activity 1 – Testing a leaf for starch
Objective: To show that leaves prepare starch through photosynthesis.

Procedure:

  1. Take a healthy potted plant.
  2. Keep it in darkness for about 24–48 hours to destarch it.
  3. Place it in sunlight for a few hours.
  4. Pluck a leaf.
  5. Boil the leaf in water.
  6. Heat it in alcohol in a water bath to remove chlorophyll, under teacher supervision.
  7. Wash the leaf with warm water.
  8. Add a few drops of iodine solution.

Observation: The leaf turns blue-black where starch is present.

Conclusion: The leaf has prepared starch through photosynthesis.

Safety: Alcohol is highly flammable. Heating and handling alcohol must be done by a teacher using a water bath, away from flames.
Activity 2 – Demonstrating the importance of sunlight
Objective: To show that sunlight is necessary for photosynthesis.

Procedure:

  1. Take a destarched potted plant.
  2. Cover a portion of a leaf with opaque black paper.
  3. Keep the plant in sunlight for a few hours.
  4. Perform the starch test on the leaf.

Observation: The exposed portion turns blue-black after the iodine test, while the covered portion does not show the same starch result.

Conclusion: Sunlight is necessary for photosynthesis.
Activity 3 – Demonstrating the release of oxygen
Objective: To observe oxygen release during photosynthesis.

Procedure:

  1. Take a beaker filled with water.
  2. Place a healthy aquatic plant such as Hydrilla inside it.
  3. Cover the plant with an inverted funnel.
  4. Place a water-filled inverted test tube over the funnel stem.
  5. Keep the setup in sunlight.

Observation: Gas bubbles emerge from the plant and collect in the test tube.

Conclusion: Oxygen is released during photosynthesis. The gas can be tested by a teacher using the appropriate glowing-splint test.

Activity 4 – Observing stomata
Objective: To observe stomata on a leaf.

Procedure: Prepare a suitable leaf epidermal peel with teacher guidance, place it on a glass slide, add a drop of water and observe under a microscope.

Observation: Small pores surrounded by guard cells can be seen.

Conclusion: Stomata help in gaseous exchange and water vapour loss.

Activity 5 – Demonstrating transpiration
Objective: To show that leaves lose water vapour.

Procedure:

  1. Take a healthy leafy branch.
  2. Cover it with a clean transparent polythene bag.
  3. Tie the bag securely around the branch.
  4. Keep the plant in sunlight for some time.

Observation: Water droplets appear on the inner surface of the polythene bag.

Conclusion: Leaves release water vapour, which condenses into droplets.

Activity 6 – Demonstrating water transport in plants
Objective: To observe the movement of water through plant tissues.

Procedure:

  1. Take a fresh white flower or celery stalk.
  2. Place it in a glass containing coloured water.
  3. Leave it for a few hours.
  4. Observe the colour of the veins or petals.

Observation: Coloured water moves through the conducting tissues and may colour the veins or petals.

Conclusion: Water is transported through xylem.

Activity 7 – Demonstrating respiration in germinating seeds
Objective: To demonstrate that germinating seeds respire.

Procedure: Place moist germinating seeds in a suitable flask and arrange a teacher-supervised experiment to detect the carbon dioxide released.

Observation: Carbon dioxide is released by germinating seeds during respiration.

Conclusion: Seeds respire to obtain energy for germination and growth.

10. In-text Questions and Answers

Q1. Why are green plants called autotrophs?
Answer: Green plants prepare their own food using carbon dioxide and water in the presence of sunlight and chlorophyll. Therefore, they are called autotrophs.
Q2. What is the main function of leaves?
Answer: Leaves mainly prepare food through photosynthesis. They also help in gaseous exchange and transpiration.
Q3. Why are leaves called the food factories of plants?
Answer: Leaves contain chlorophyll and are the main sites of photosynthesis. They prepare food for the plant using sunlight, carbon dioxide and water.
Q4. What happens if a plant does not receive sunlight for a long time?
Answer: Photosynthesis decreases or stops when there is no light. The plant cannot prepare sufficient food and may become weak and eventually die if the condition continues.
Q5. How does carbon dioxide enter a leaf?
Answer: Carbon dioxide enters the leaf mainly through tiny pores called stomata.
Q6. Which tissue transports water and minerals in plants?
Answer: Xylem transports water and dissolved minerals from roots to stems and leaves.
Q7. Which tissue transports prepared food in plants?
Answer: Phloem transports prepared food from leaves to different parts of the plant.
Q8. Why do plants need transpiration?
Answer: Transpiration helps in the upward movement of water and minerals and cools the plant.
Q9. Do plants respire during the day?
Answer: Yes. Plants respire continuously during both day and night to release energy from food.
Q10. How do plants remove waste materials?
Answer: Plants remove wastes through diffusion, transpiration, storage in leaves and bark, shedding of plant parts and release of some substances into the soil.

11. NCERT Exercise Solutions

Q1. What are life processes? Name the important life processes in plants.
Answer:

Life processes are essential activities performed by living organisms to maintain life.

Important life processes in plants include nutrition, respiration, transportation and excretion.

Q2. What is photosynthesis? Write its requirements.
Answer:

Photosynthesis is the process by which green plants prepare food from carbon dioxide and water using sunlight and chlorophyll.

Requirements:

  1. Sunlight.
  2. Chlorophyll.
  3. Carbon dioxide.
  4. Water.
Q3. Explain the importance of chlorophyll in photosynthesis.
Answer:

Chlorophyll is the green pigment present in chloroplasts. It absorbs light energy from the Sun and helps plants use this energy for photosynthesis.

Q4. What are stomata? Write their functions.
Answer:

Stomata are tiny pores present mainly on the surface of leaves. Each stoma is surrounded by guard cells.

Functions:

  • Allow carbon dioxide to enter.
  • Allow oxygen to leave.
  • Help in transpiration.
  • Regulate gaseous exchange through opening and closing.
Q5. Differentiate between autotrophic and heterotrophic nutrition.
Autotrophic nutritionHeterotrophic nutrition
Organisms prepare their own food.Organisms depend on other organisms for food.
Requires simple inorganic substances.Obtains organic food from other sources.
Example: Green plants.Example: Animals and fungi.
Q6. What is the difference between photosynthesis and respiration?
PhotosynthesisRespiration
Food is prepared.Food is broken down to release energy.
Requires light energy.Does not directly require sunlight.
Occurs in chloroplasts.Occurs in the cytoplasm and mitochondria.
Stores energy in food.Releases usable energy.
Q7. Explain the role of xylem and phloem.
Answer:

Xylem: Transports water and minerals from roots to other parts of the plant.

Phloem: Transports prepared food from leaves to different parts of the plant.

Q8. What is transpiration? Explain its importance.
Answer:

Transpiration is the loss of water in the form of water vapour from the aerial parts of plants, mainly through stomata.

Importance:

  1. Helps in upward movement of water.
  2. Creates transpiration pull.
  3. Helps in cooling the plant.
  4. Supports mineral transport.
Q9. Why do plants need respiration?
Answer:

Plants need respiration to release energy from food. This energy is required for growth, repair, cell division, transportation and other life activities.

Q10. How do plants remove waste products?
Answer:

Plants remove waste materials through diffusion, transpiration and the shedding of leaves and bark. Some wastes are stored in vacuoles or in plant parts such as leaves, bark and fruits. Certain substances are also released into the soil through roots.

Q11. Explain how water is transported from roots to leaves.
Answer:

Root hairs absorb water from the soil. Water passes through root tissues and enters xylem vessels. It is transported upwards through the stem to the leaves. Root pressure and transpiration pull contribute to this movement.

Q12. Why is transpiration called a necessary evil?
Answer:

Transpiration is beneficial because it helps in water transport and cooling. However, excessive transpiration can cause water loss and wilting, especially when water availability is low. Therefore, it is sometimes described as a necessary evil.

12. Important Definitions and Revision Notes

Important scientific definitions
TermDefinition
NutritionProcess of obtaining and using food.
AutotrophsOrganisms that prepare their own food.
PhotosynthesisProcess of preparing food using light energy.
ChlorophyllGreen pigment that absorbs light energy.
ChloroplastCell organelle where photosynthesis takes place.
StomataTiny pores on plant surfaces involved in gaseous exchange.
Root hairsExtensions of root cells that absorb water and minerals.
XylemConducting tissue that transports water and minerals.
PhloemConducting tissue that transports prepared food.
TranspirationLoss of water vapour from aerial parts of plants.
RespirationProcess of releasing energy from food.
ExcretionRemoval of metabolic waste materials.
Important equations
Photosynthesis:
6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂
Aerobic respiration:
Glucose + Oxygen → Carbon dioxide + Water + Energy
Anaerobic respiration in yeast:
Glucose → Ethanol + Carbon dioxide + Energy
Quick revision – One-line answers
  1. Food preparation in green plants – Photosynthesis.
  2. Green pigment in leaves – Chlorophyll.
  3. Site of photosynthesis – Chloroplast.
  4. Gas required for photosynthesis – Carbon dioxide.
  5. Gas released during photosynthesis – Oxygen.
  6. Water-absorbing structures – Root hairs.
  7. Water-conducting tissue – Xylem.
  8. Food-conducting tissue – Phloem.
  9. Loss of water vapour – Transpiration.
  10. Exchange of gases in leaves – Stomata.
  11. Energy-releasing process – Respiration.
  12. Removal of waste – Excretion.

13. Additional Practice Questions with Answers

Q1. Why are plants called the primary producers of an ecosystem?
Answer: Plants prepare their own food through photosynthesis and provide food directly or indirectly to other organisms.
Q2. Why do leaves appear green?
Answer: Leaves appear green because chlorophyll reflects more green light than it absorbs.
Q3. Why do plants wilt when they do not receive enough water?
Answer: Plant cells lose water and turgidity when water availability is insufficient. As a result, leaves and stems may droop.
Q4. Why is the upper surface of many leaves exposed to sunlight?
Answer: Exposing leaves to sunlight helps them receive light energy required for photosynthesis.
Q5. Why are root hairs important?
Answer: Root hairs increase the surface area of roots and help absorb water and dissolved minerals from the soil.
Q6. What happens if stomata remain closed for a long time?
Answer: Gas exchange is reduced. Carbon dioxide entry decreases, affecting photosynthesis. Water loss through transpiration also decreases.
Q7. Why is photosynthesis important for animals?
Answer: Photosynthesis produces food that supports food chains and releases oxygen required by many living organisms for aerobic respiration.
Q8. Why do plants respire even at night?
Answer: Plants require energy continuously for cellular activities. Therefore, respiration takes place both during the day and at night.
Q9. What is the difference between transpiration and guttation?
TranspirationGuttation
Loss of water as vapour.Loss of liquid water droplets.
Occurs mainly through stomata.Usually occurs through hydathodes.
Often occurs during the day.Commonly occurs at night or early morning under suitable conditions.
Q10. Explain why photosynthesis and respiration are complementary processes.
Answer:

Photosynthesis produces glucose and oxygen, which are used in aerobic respiration. Respiration releases carbon dioxide and water, which can be used during photosynthesis. Thus, the two processes are interconnected in the cycling of matter and energy.

No comments:

Post a Comment